Mỡ bôi trơn shell gadus s5 v142w 00

Hotline:
CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ KỸ THUẬT HẠNH SAN CHUYÊN CUNG CẤP CÁC SẢN PHẨM DẦU NHỚT CÔNG NGHIỆP CHÍNH HÃNG SHELL VPGD: P 11, T 17, Tháp B, Tòa HH Thái Hà, KĐT TP Giao Lưu, P. Cổ Nhuế 2, Q. Bắc Từ Liêm, Hà Nội
Hotline:
094 183 8228
0977 966 472
Email:
bxtlub@gmail.com
Mỡ bôi trơn shell gadus s5 v142w 00 Mỡ bôi trơn shell gadus s5 v142w 00 Shell gadus s5 v142w 00 ( Former name Shell Tivela Grease GL 00) is a synthetic, semi-fluid gear lubricant developed to meet the highest requirements of industrial gearboxes allowing long life trouble free operation. Mỡ bôi trơn shell gadus s5 v142w 00 Mỡ bôi trơn Số lượng: 0 sản phẩm
Mỡ bôi trơn shell gadus s5 v142w 00
  •  
Mỡ bôi trơn shell gadus s5 v142w 00
  • Đăng ngày 15-11-2018 11:15:40 AM - 190 Lượt xem
  • Giá bán: Liên hệ
  • Shell gadus s5 v142w 00 ( Former name Shell Tivela Grease GL 00) is a synthetic, semi-fluid gear lubricant developed to meet the highest requirements of industrial gearboxes allowing long life trouble free operation.


Shell gadus s5 v142w 00

Shell gadus s5 v142w 00 ( Former name Shell Tivela Grease GL 00) is a synthetic, semi-fluid gear lubricant developed to meet the highest requirements of industrial gearboxes allowing long life trouble free operation.

Applications

Small industrial gear units
Worm gears: the low steel/tin-bronze frictional characteristics of Shell gadus s5 v142w 00 make it particularly suitable for worm gears having this combination of alloys.
Steel/Aluminium-bronze : Shell gadus s5 v142w 00 is not recommended for the combination steel/aluminium-bronze, for which a grease based on a higher viscosity mineral oil is preferred.
Flushing and filling with Shell gadus s5 v142w 00 is a synthetic polyglycol based lubricant and must not be mixed with mineral oils. Care should be taken when changing over from oil or conventional grease. Flushing with a thin mineral oil will ensure, as far as possible, freedom from solid contaminants and deterioration products resulting from previous use of gear oils or greases. It is important to ensure that none of the flushing oil remains in the gearbox. When refilling the gearbox with Shell gadus s5 v142w 00 every precaution should be taken to ensure complete cleanliness. For optimum performance from both gearbox and lubricant, only the amount recommended by the gearbox manufacturer should be used.
Paints : High quality red lead or epoxy resin paints are recommended for use in contact with Shell gadus s5 v142w 00, as the synthetic polyglycol component will tend to attack certain conventional paints.
Seals : Shell gadus s5 v142w 00 may be used satisfactorily with all normal seal materials. Leather seals are not recommended as the natural fats tend to be removed, leaving the seals thin and brittle.

Performance Features

Small industrial gear boxes can be lubricated for life with this semi-fluid grease.
Reduced power consumption and lower bulk lubricant temperature
Lower start up torque compared with a conventional grease
Reduced lubricant leakage : top up usually not required
The load carrying capacity of the base oil in Shell gadus s5 v142w 00 is extremely good. In steel-steel scuffing tests using the IAE gear rig, under standard conditions, the load carrying capacity is some 65% higher than an equi-viscous mineral oil, without using EP additives.
Use of a proven product with excellent track records in many types of gear boxes (David Brown, SEW, Leroy-Somer, etc.) in severe service and wide range of operation conditions.
Operating Temperature Range
Lubricants exposed to high temperatures and air will inevitably oxidise resulting in the formation of lacquer and sludge and inefficient operation due to an excessive increase in viscosity.
Shell gadus s5 v142w 00 has excellent oxidation stability. It produces no lacquer or sludge and does not increase in viscosity under normal operating conditions. It consequently provides much better performance at high temperatures than conventional gear greases.

Package

18kg/ pail

Được cung cấp bởi:

  • CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ KỸ THUẬT HẠNH SAN
  • Địa chỉ: Số 22, Ngách 85/11, Đường Định Công Thượng, P. Định Công, Q. Hoàng Mai, TP. Hà Nội
  • VPGD: P.102, Số 37B, Ngõ 20, Đường Hồ Tùng Mậu, P. Mai Dịch, Q. Cầu Giấy, TP. Hà Nội
  • Điện thoại: 094.183.8228  097.796.6472
  • Email:        bxtlub@gmail.com
  • Website:     http://hanhsan.com
Thống kê truy cập
  • Đang truy cập57
  • Máy chủ tìm kiếm1
  • Khách viếng thăm56
  • Hôm nay1,948
  • Tháng hiện tại25,454
  • Tổng lượt truy cập2,296,205

Copyright © 2016 Công ty TNHH TM&DV Kỹ thuật Hạnh San | design by: dangkha - 0974 624 069

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây