CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ KỸ THUẬT HẠNH SAN
CHUYÊN CUNG CẤP CÁC SẢN PHẨM DẦU NHỚT CÔNG NGHIỆP CHÍNH HÃNG SHELL
VPGD: P 11, T 17, Tháp B, Tòa HH Thái Hà, KĐT TP Giao Lưu, P. Cổ Nhuế 2, Q. Bắc Từ Liêm, Hà Nội
HEAT TRANSFER FLUID VBC THERM SYN 32
- Đăng ngày 28-05-2017 08:45:13 PM - 1241 Lượt xem
- Giá bán: Liên hệ
-
VBC THERM SYN 32 is a heat transfer fluid of alkyl benzenes type such as C14~C30 not containing mineral oil. I℃t is use℃d for application that require liquid phase heat transfer of indirect heater of various circulation system. The proper use of temperature is -20 ~320 as a chemical factory, dyeing factory as well as heating, indirect heating device of the general use.
HEAT TRANSFER FLUID VBC THERM SYN 32
VBC THERM SYN 32 is a heat transfer fluid of alkyl benzenes type such as C14~C30 not containing mineral oil. I℃t is use℃d for application that require liquid phase heat transfer of indirect heater of various circulation system. The proper use of temperature is -20 ~320 as a chemical factory, dyeing factory as well as heating, indirect heating device of the general use.
Benefits
1. Auto-ignition temperature is very high compared to the normal mineral oil and competing products. So it has relatively low fire risk.
2. Oxidative stability compared to mineral oil type of competitive products is very excellent products. It generates less sludge.
3. It has advantages for maintaining cleanliness due to its excellent solubility compared to that of mineral oil type.
4. Can be mixed with general mineral type or alkyl benzenes type heat transfer
5. Easy to maintain for ferrous metals, non-ferrous metal by its corrosion
6. Excellent anti-foaming ability will not cause any problems during circulation
Properties
Contents | Results | Method |
Specific gravity, 15/4℃ | 0.8722 | ASTM D 1298 |
Kinetic viscosity, 40℃, cSt | 32.59 | ASTM D 445 |
Flash point, TAG, ℃ | 193 | ASTM D 93 |
Pour Point ( ) | -30 | ASTM D 97 |
Water Content ppm | < 50 | Karl Fisher |
Acid value mg/KOH/g | < 0.1 | ASTM D 974 |
Copper Corrosion (100 /1hrs) | 1A | ASTM D 130 |
Auto-ignition point | 400 ↑ | ASTM D 2155 |
Comparison between VBC THERM SYN 32 and normal mineral oil type therm oil
ITEM | VBC THERM SYN 32 | Mineral Oil type Heat transfer fluid |
| It generates less sludge because of its aromatic structures which is difficult to make thermal | The aliphatic hydrocarbon structure makes much sludge because of its unstable thermal stablility |
| | This℃is relatively high risk of fire because it’s auto-ignition temperature is below |
It ha℃s low fire risck because auto- ignition temperature is higher than | ||
| Excellent low temperature fluidity is relatively small load when starting up the pump. | The pump load is high due to it’s relatively high pour point at starting-up the pump |
| Excellent heat resistance makes it replacement cycle longer and fuel consumption is low due to its good heat transfer characteristic. | Exchange period is short because thermal stability is bad. Local heating by sludge makes high fuel consumption. |
Packing
1,000L Tote, 200L Drum, 20L Pail
Được cung cấp bởi:
- CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ KỸ THUẬT HẠNH SAN
- Địa chỉ: Số 22, Ngách 85/11, Đường Định Công Thượng, P. Định Công, Q. Hoàng Mai, TP. Hà Nội
- VPGD: P.102, Số 37B, Ngõ 20, Đường Hồ Tùng Mậu, P. Mai Dịch, Q. Cầu Giấy, TP. Hà Nội
- Điện thoại: 094.183.8228 097.796.6472
- Email: bxtlub@gmail.com
- Website: http://hanhsan.com
Sản phẩm cùng loại
Danh mục sản phẩm
Hỗ trợ trực tuyến
Tin tức
Thống kê truy cập
- Đang truy cập12
- Hôm nay1,841
- Tháng hiện tại57,056
- Tổng lượt truy cập7,399,591
Copyright © 2016 Công ty TNHH TM&DV Kỹ thuật Hạnh San | design by: dangkha - 0974 624 069