High performance bearing grease Castrol Tribol GR 100 PD 2

Hotline:
CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ KỸ THUẬT HẠNH SAN CHUYÊN CUNG CẤP CÁC SẢN PHẨM DẦU NHỚT CÔNG NGHIỆP CHÍNH HÃNG SHELL VPGD: P 11, T 17, Tháp B, Tòa HH Thái Hà, KĐT TP Giao Lưu, P. Cổ Nhuế 2, Q. Bắc Từ Liêm, Hà Nội
Hotline:
094 183 8228
0977 966 472
Email:
bxtlub@gmail.com
High performance bearing grease Castrol Tribol GR 100 PD 2 High performance bearing grease Castrol Tribol GR 100 PD 2

High performance bearing grease Castrol Tribol GR 100 PD 2 are lithium based grease containing highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying micro-smoothing of the friction surfaces.

Castrol Tribol GR 100 PD 2 Sản phẩm khác Số lượng: 0 sản phẩm
High performance bearing grease Castrol Tribol GR 100 PD 2
  •  
High performance bearing grease Castrol Tribol GR 100 PD 2
  • Đăng ngày 26-12-2018 09:12:18 AM - 249 Lượt xem
  • Giá bán: Liên hệ
  • High performance bearing grease Castrol Tribol GR 100 PD 2 are lithium based grease containing highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying micro-smoothing of the friction surfaces.


High performance bearing grease Castrol Tribol GR 100 PD 2

Castrol Tribol GR 100 PD 2 are lithium based grease containing highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying micro-smoothing of the friction surfaces.
Under severe load, components of the MFT additive combination are activated and diffuse into the surfaces initiating an improvement of their friction characteristics through plastic deformation. The organic reaction products become a component of the tribopolymer system. Unlike the case with conventional lubricants, the tribopolymers formed by MFT are long-chained compounds with excellent lubricity and adhesion. The load carrying area is improved, a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a non-sacrificial micro-smoothing of the friction surfaces.

Advantages

High performance bearing grease Castrol Tribol GR 100 PD 2 help:
• High load bearing capacity – extends the operating period under high loads leading to optimum wear protection
• Superior lubrication and surface smoothing effects due to MFT reduced failures leading to less downtime and repair work. MFT can result in prolonging the life of damaged components/bearings
• Establishment of a protective layer of MFT – this additive system can effectively increase the load bearing area, thus reducing unit pressures, operating temperatures and wear, increasing service life of both parts and lubricant
• Improved bearing surfaces for longer service life result from the ‘running in’ effect of MFT
• Extremely low coefficients of friction – generating energy savings and reduced noise levels
• Multi-functional – Longtime PD 0 and PD 00 are highly recommended for anti-friction bearings with grease reservoir and for leaky gearboxes
• Easily pumpable in central lubrication systems – does not channel on gears running at high speeds when using PD 0 and PD 00
• Exceptional water resistance – coating film stays on the surface even in presence of water; even when exposed to the action of hot and chemically active process water

Application

Castrol Tribol GR 100 PD 2 can be used for long term or lifetime lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range in highly loaded rolling and sliding bearings. They can also be used in bearings of spinning and grinding spindles, for gear motors exposed to shock loads, in screening/wood shaping machines and for bearing surfaces of printing plates.
These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load, e.g. in spreader rolls, roll neck bearings in steel mills, and for bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems.
Longtime PD 0 and PD 00 can be used as a semi-fluid grease lubricant in gears such as flange, drum-type and worm gears. It is also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir.

Package:

Pail 18kg, drum 180 kg

Được cung cấp bởi:

  • CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ KỸ THUẬT HẠNH SAN
  • Địa chỉ: Số 22, Ngách 85/11, Đường Định Công Thượng, P. Định Công, Q. Hoàng Mai, TP. Hà Nội
  • VPGD: P.102, Số 37B, Ngõ 20, Đường Hồ Tùng Mậu, P. Mai Dịch, Q. Cầu Giấy, TP. Hà Nội
  • Điện thoại: 094.183.8228  097.796.6472
  • Email:        bxtlub@gmail.com
  • Website:     http://hanhsan.com
Thống kê truy cập
  • Đang truy cập31
  • Máy chủ tìm kiếm1
  • Khách viếng thăm30
  • Hôm nay1,915
  • Tháng hiện tại25,421
  • Tổng lượt truy cập2,296,172

Copyright © 2016 Công ty TNHH TM&DV Kỹ thuật Hạnh San | design by: dangkha - 0974 624 069

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây