The BP Enersyn MP-S 68 lubricants are primarily intended to lubricate refrigeration compressors where Hydrogenfluorocarbon (HFC) refrigerant e.g. R-134a is in use.
Miscibile with R-134a refrigerant (Critical Solution Temperatures down to -35°C)
Can be used with other refrigerants
Compatible and miscible with mineral oils
Good thermal oxidative stability
Antiwear Characteristics
Enersyn MP-S 68 is approved by Sabroe.
Conversion to R-134a refrigerant from R-12 necessitates a change in the type of lubricant. Changing over to Enersyn MP-S 68 must be in accordance with the compressor manufacturers recommendations.
Delivered in packs of approximately 4 litres and filled under a nitrogen blanket. Damaged or leaking containers should not be used. As with all refrigerant lubricants special care should be taken to avoid contamination by moisture. The product should not be stored at an ambient temperature above 60°C, or exposed to hot sun or freezing conditions.
Ensure containers are tightly re-sealed after use.
Được cung cấp bởi:
Copyright © 2016 Công ty TNHH TM&DV Kỹ thuật Hạnh San | design by: dangkha - 0974 624 069