AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties. AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation – corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is capable of wide temperature range operation.
AeroShell Fluid 41 is intended as an hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a “superclean” fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –540C to 900C and pressurised between –540C to 1350C.
AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber.
AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 61 and 71 and SSF/LGF.
Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.
· COMAC Approved to QPL-CMS-OL-104
· Approved MIL-PRF-5606H* (both U.S. and European
production)
· Approved DEF STAN 91-48 Grade Superclean* (European production only)
Meets DEF STAN 91-48 Grade Normal (European production only) Equivalent to DEF STAN 91-48 Grades Superclean* & Normal (U.S. production only)
· Approved DCSEA 415/A (French)
· Analogue to AMG-10 (Russian)
· NATO Code H-515* (equivalent H-520)
· Joint Service Designation OM-15* (equivalent OM-18)
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.
Copyright © 2016 Công ty TNHH TM&DV Kỹ thuật Hạnh San | design by: dangkha - 0974 624 069